26-11.

Products // Switches and Jacks // 26-11. Toggle switch

  • single pole design
  • 7 detent and two push button combinations
  • max. 3 positions
  • two toggle colours (blue and black) available
  • 20000 switching cycles
  • water-tight design available

For the mechanical fixation of the switch to the PCB, there is, apart from the tongue and groove system, room for an additional plastic- or metal-fixation-peg, which can be soldered. The toggle-switch is a front-panel-component acc. DIN 41494 for 19'' racks in industrial electronics. This toggle switch is also available in SMT-design with virtually identical dimensions.

Mechanical Data

Fixation mode THT
Pitch of solderpins 2.54mm
Number of poles 1 or 2 pole
Number of switching positions 3 max.
Mech. lifetime 20 000 operations
Electrical lifetime min. 10 000 actuations
Operating function detent pos/impulse pos.
Switching mode break before make
Operatiing torque 1,5-3Ncm
Stop strength 15Ncm
Vibration >20g
Shock test >50g
Resistance against cleaning fluids yes
Operating temperature -25...+85°C

Electrical Data

Switching voltage 60~/75-V
Contact load, dynamic 0,5A
Standby current (20°C) max. 2A
Contact rating max. 10VA
Test voltage 500V 50Hz
Contact resistance initial < 50mΩ
Insulation resistance >10 000MΩ
Insulations class VDE 0110 Gr. C
Critical capacity < 2pF
ESD protection 8kV

Material

Housing PA6 GF30
Contacts CuSn8+Ni+Au